Skip to content
Close
CONTACT
PHONE: +61 (0)7 4145 4465EMAIL: sales@weldpoly.com
GET A QUOTE
NEED PARTS?
PHONE: +61 (0)7 4145 4465EMAIL: sales@weldpoly.com
GET A QUOTE
NEED PARTS?
PolySaw914_CNC

PolySaw1200/48

Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in HDPE used for the production of bends

workshop_pipe_saws_polysaw_1200_front_view
PolySaw1200/48

Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in HDPE used for the production of bends, tees and other fabrications. Capacity 200 to 1200mm OD / 8" to 48" IPS. Cutting angle is -45 to +67.5 degrees.

Lowering rate of saw is hydraulically controlled, as are the top-mounted V-clamps used to hold pipe segments in place. Saw blade made in Germany. Low profile design allows safe, simple operation.

GET A QUOTE
200mm to 1200mm
8" to 48"

WHAT'S INSIDE

GENERAL INCLUSIONS
  • → Cutting range 200 to 1200mm OD.
  • → 67 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees.
  • → Hydraulic lock/release of main pipe
  • → Cutting feed is hydraulically controlled.
  • → Laser blade positioning.
  • → Special saw blade available for thick walled pipe.
  • → Angular cutting error equal to or less than 1 degree.
  • → Speed of saw blade 250 m/min.
  • → - Emergency stop at operation panel.
  • → - Before saw blade is running，it alarms with both a flashing light and audible alarm for a few seconds.
  • → - Equipped with saw blade detection device. Once saw blade is broken, machine will stop immediately.
  • → - Saw blade guides expand and contract automatically Once pipe diameter and fitting types has been selected, assuring close contact with pipe for blade protection.
  • → - Saw guide travel is limited by proximity switches.
  • → - Pipe or fitting is locked by hydraulic controlled bar - easy, safe and reliable.
  • → - Low pipe bed design, providing easy and safe reception of cut pieces.
  • → Weight 7,000kg
  • → Please note technical specifications of worldpoly machines may change without notice
ELECTRICS
  • → - All electric operating buttons and handles are operated at 24DCV.
  • → 400 volt 3 phase 50 Hz (5.5 Kw 4.2 A). optional 480/3/60 or 220/3/60.
WARRANTY
  • → Genuine 24 month international warranty.

LET'S TALK

Tough, no-nonsense poly welding gear backed by decades of real-world expertise. At Weldpoly, we deliver machines that work as hard as you do—reliable, efficient, and built for the demands of HDPE welding. With a team that knows the job inside out, we’re your partner in getting it done right the first time.
GET IN TOUCH